The treatment method for engine water temperature of self feeding, mixing and conveying integrated vehicle is too high

自动上料搅拌机是一种特殊的专用驾驶车辆，具有特定的工作环境，不可避免地发动机水温过高。每次发生这种情况，都会对设备产生一定的影响。那么，如果水温太高怎么办？然后编辑会告诉您。

The automatic charging mixer is a special special driving vehicle, which has a specific working environment, so it is inevitable that the engine water temperature is too high. Every time this happens, it will have a certain impact on the equipment. So what if the water temperature is too high? Then the editor will tell you.

1.在正常道路上，自动上料搅拌车的发动机过热。尽快减速，在树荫下行驶，或在相对凉爽的地方行驶并停下来。但是，不要急停汽车。

1. On normal roads, the engine of the automatic feeding mixer is overheated. Slow down as soon as possible, drive in the shade, or drive in a relatively cool place and stop. But don't stop the car in a hurry.

2.打开发动机盖，让发动机以怠速运行，然后等待发动机温度逐渐恢复正常。当发动机的水温恢复正常时，请停止发动机。接下来，等待一会儿，直到发动机水温充分下降，然后检查发动机中的冷却水量。

2. Open the engine cover, let the engine run at idle speed, and then wait for the engine temperature to gradually return to normal. When the water temperature of the engine returns to normal, please stop the engine. Next, wait for a while until the engine water temperature drops sufficiently, and then check the amount of cooling water in the engine.

3.此时，自动供料搅拌车发动机的冷却水量可能会大大不足。在补充指定量的冷却水后，可以再次检查冷却系统以确认没有其他异常，然后可以启动发动机并继续运行。另外，检查水箱的百叶窗没有被异物堵塞，风扇叶片是否运转，发动机皮带没有打滑以及发动机水泵是否运转。

3. At this time, the cooling water of the engine of the automatic feeding mixer may be greatly insufficient. After replenishing the specified amount of cooling water, the cooling system can be checked again to confirm that there are no other abnormalities, and then the engine can be started and continue to run. In addition, check that the louver of the water tank is not blocked by foreign matters, whether the fan blade is running, whether the engine belt is not slipping and whether the engine water pump is running.

上面介绍的有关知识是关于自上料搅拌输送一体车发动机中水温过高的处理方法，我想每个人都对此有所了解。如果遇到此问题，可以使用上面的方法适当地它。

The above knowledge is about how to deal with the excessive water temperature in the engine of the truck. I think everyone knows something about it. If you encounter this problem, you can use the above method to solve it properly.