In the implementation of all-in-one mixer testing steps, inform everyone of unknown problems and knowledge. But we are still relatively unfamiliar with our industry. Today we come to understand:

1.电池维护检查：检查电池是否牢固固定。

1. Battery maintenance inspection: check whether the battery is firmly fixed.

2.轮胎检查：有必要每月在室温下检查轮胎压力。

2. Tire inspection: it is necessary to check the tire pressure at room temperature every month.

3.检查离合器主泵的水位。离合器液位正常。如果低于标准线，则可能会损坏主泵或泵筒。

3. Check the water level of clutch main pump. The clutch fluid level is normal. If it is below the standard line, the main pump or pump barrel may be damaged.

4.检查制动液的液位。制动液在高位和低位之间也是正常的。

4. Check the brake fluid level. The brake fluid is also normal between high and low.

5.检查发动机冷却液液位：发动机热时请勿打开散热器盖。如果打开，冷却剂和热蒸汽可能会散开并引起灼伤。发动机冷却时，请确保冷却液液位在满和低之间。否则，您需要添加蒸馏水或纯净水或冷冻溶液。加水后液体的高度不应超过满水位。如果您发现冷却液在短时间内急剧下降，则自动搅拌器检查步骤应检查冷却系统是否泄漏或前往维护站进行检查。

5. Check the engine coolant level: do not open the radiator cap when the engine is hot. If turned on, the coolant and hot steam may disperse and cause burns. When the engine is cooling, make sure that the coolant level is between full and low. Otherwise, you need to add distilled or purified water or frozen solution. After adding water, the liquid height should not exceed the full water level. If you find that the coolant drops sharply in a short time, the automatic mixer inspection procedure should check whether the cooling system leaks or go to the maintenance station for inspection.

搅拌一体车的检验程序的污泥对自给式搅拌机的影响，你了解了吗？

Do you understand the influence of sludge in the inspection procedure of mixer on self-contained mixer?