Automatic feeding mixer is very fuel consuming at work, and the price of oil in our market is relatively expensive, so in the use of vehicles, we should learn to save fuel.

一、车辆起步

1、 Vehicle start

车辆在起步时，可以大油门，充分发挥发动机的性能，让自动上料搅拌车以快的时间达到巡航车速，这样驾驶可以达到节油的目的。

When the vehicle starts, it can make full use of the performance of the engine with a large throttle, so that the automatic feeding mixer can reach the cruising speed in the fastest time, so that the purpose of fuel saving can be achieved.

二、平路行驶

2、 Driving on a level road

1、平路行驶时，尽量在一条车道上行驶，减少来回变换车道的情况发生，有利于节油。

1. When driving on a flat road, try to drive in one lane to reduce the occurrence of lane changing back and forth, which is conducive to fuel saving.

2、如果与其他车辆结伴而行，切勿采用跟车的方式，可以各自行驶，约定好相聚点。往往在后面跟车的车辆油耗会高于前车。

2. If you travel with other vehicles, do not follow them. You can drive separately and make a meeting point. Often, the fuel consumption of the car following will be higher than that of the car in front.

3、控制好发动机转速，不同发动机，控制转速不一致。

3. Control engine speed, different engine, control speed is not consistent.

4、在平路行驶时，尽量保持油门开度的稳定，油门在30%左右即可，切忌油门忽高忽低。

4. When driving on a level road, try to keep the opening of the throttle as stable as possible, and the throttle can be about 30%. Avoid high and low throttle by all means.

三、车辆爬坡

3、 Vehicle climbing

1、自动上料搅拌车在爬坡的时候，坚持小坡冲，大坡稳的原则。

1. Automatic feeding mixer in climbing, adhere to the principle of small slope, big slope stability.

2、坡度小路段的时候可以采用冲坡的方式，车辆提前加速，让车辆具有足够的惯性行驶到坡顶。

2. When the slope is small, we can use the way of slope, the vehicle accelerates in advance, so that the vehicle has enough inertia to drive to the top of the slope.

4、在车辆即将到达坡顶时，如果前方是下坡，可以减小油门开度，利用车辆的惯性到达坡顶，切勿在即将到达坡顶时增挡，这时完全可以利用下坡的惯性进行增速，减少不必要的燃油消耗。

4. When the vehicle is about to reach the top of the slope, if the front is downhill, you can reduce the throttle opening and use the inertia of the vehicle to reach the top of the slope. Do not increase the gear when you are about to reach the top of the slope. At this time, you can use the inertia of the downhill to increase the speed and reduce unnecessary fuel consumption.