Automatic feeding mixer will encounter some faults when working. Don't panic when faults occur again. Correct handling is the best way. Now for you to introduce the automatic feeding mixer cylinder rupture reason is what!

导致搅拌车汽缸破裂的原因有很多，要预防气缸破裂，应该做到:发动机温度过高时，必须等发动机温度降低后，再加水发动；不得先启动发动机，后加冷却水，以免使气缸崩裂'

There are many reasons leading to the cylinder rupture of the automatic feeding mixer. To prevent the cylinder rupture, we should do the following: when the engine temperature is too high, we must wait for the engine temperature to decrease, and then add water to start; it is not allowed to start the engine first, and then add cooling water, so as not to cause the cylinder rupture

在严寒条件下，需放尽冷却水，启动车时加热水启动；冬季停车若时间较长，又不能放水时，可间歇发动车辆，保持发动机有一些温度而不于结冰，不得用喷灯或明火直接烤车，同时使用的冷却水要洁净。

In severe cold conditions, it is necessary to drain cooling water and start the car with heated water. If the car stops for a long time in winter and water can not be drained, it can start the car intermittently to keep the engine at some temperature without freezing. It is not allowed to bake the car directly with blowtorch or open fire, and the cold water used at the same time should be clean.

自动上料搅拌车如果气缸套出现破损，发动机在进气行程时会吸入冷却液，而在压缩行程时高压气体会从破损处进入冷却水道。无论出现哪一种情况，都将妨碍可燃混合气的形成和燃烧，甚使发动机无法正常工作，将严重影响发动机的使用寿命。

If the cylinder liner of automatic feeding mixer is damaged, the engine will inhale coolant during the intake stroke, and the high-pressure gas will enter the cooling channel from the damaged part during the compression stroke. No matter what happens, it will hinder the formation and combustion of combustible mixture, and even make the engine unable to work normally, which will seriously affect the service life of the engine.