Automatic feeding mixer is a special heavy truck, with high load, complex road conditions and large inertial centrifugal force in the tank mixing process, which brings heavy burden to the braking system of the mixing system. Although the braking system is very important to the mixer system, the braking distance and thermal degradation of the brake should be considered first when determining the safety of the mixer.

如果自动上料搅拌车的制动系统出现问题，驾驶员和乘客也有危险。因此，在驾驶或踩踏制动器时，请务必小心制动器。

If there is a problem with the brake system of the automatic feeding mixer, the driver and passengers are also at risk. Therefore, when driving or pressing the brake, please be careful of the brake.

1.制动时发出异常声音

1. Abnormal sound when braking

踩刹车时，刹车系统会产生强烈的金属摩擦。这可能是由于刹车片上的异物或刹车盘上的锈蚀所致。

When you step on the brake, the brake system will produce strong metal friction. This may be due to foreign matter on the brake pads or rust on the brake discs.

2，刹车踏板行程会更长

2. The brake pedal travel will be longer

制动器柔软时，可以看到白色斑点。较长的制动行程的原因主要是由于空气侵入制动系统，缺少制动油，可能的泄漏以及制动衬块的严重磨损。

White spots can be seen when the brake is soft. The reason for the longer brake stroke is mainly due to air intrusion into the brake system, lack of brake oil, possible leakage and serious wear of brake pads.

3，刹车偏

3. The brake is biased

制动器偏离现象不是很普遍，主要反映了在施加制动器时手柄偏向一侧的事实。造成这种现象的原因是制动衬块偏心磨损和制动缸问题。

The phenomenon of brake deviation is not very common, which mainly reflects the fact that the handle is biased to one side when the brake is applied. The causes of this phenomenon are eccentric wear of brake pad and brake cylinder.

4，刹车变得越来越困难

4. Braking becomes more and more difficult

许多搅拌车具有增强的制动问题。加强制动器的主要原因是真空助力器损坏。制动器不辅助，经常使用。

Many mixers have enhanced braking problems. The main reason for strengthening the brake is that the vacuum booster is damaged. The brake is not auxiliary and is often used.

5，刹车回弹

5. Brake rebound

有许多自动上料搅拌车伙伴遇到这种情况，但是在应用制动时，主要是由于制动盘表面的不规则性，上肢弹回了制动踏板。垫子和钢圈变形。

There are many automatic feeding mixer partners encounter this situation, but in the application of braking, it is mainly due to the irregularity of the surface of the brake disc, and the upper limb bounces back to the brake pedal. The cushion and steel ring are deformed.

自动上料搅拌车的制动器运行异常了解就是这些，你明白了吗？自动上料搅拌

The brake of automatic feeding mixer runs abnormally. That's all I know. Do you understand? Automatic feeding and mixing