欢迎来到中科聚峰机械有限公司!

24小时服务热线:

400-879-1999

点击拨打服务热线:400-879-1999
当前位置:首页>新闻中心>公司动态关于上料搅拌车的车漆保护的方法?

关于上料搅拌车的车漆保护的方法?

来源:http://www.jfhntjbj.com/ 日期:2021-04-20 发布人:admin
概述:在车辆的行驶中我们可能会遇到刮碰,导致车漆脱落,今天我们讲一下关于上料搅拌车的车漆是否需要保护。During the driving of the veh
在车辆的行驶中我们可能会遇到刮碰,导致车漆脱落,今天我们讲一下关于上料搅拌车的车漆是否需要保护。
During the driving of the vehicle, we may encounter scratch and collision, which may cause the paint to fall off. Today we will talk about whether the paint of the feeding mixer needs to be protected.
1、尽量把搅拌机停放在车库里,停车的时候不要有强阳光暴晒,减少雨淋。
1. Park the mixer in the garage as far as possible. Don't expose to strong sunlight when parking to reduce the rain.
2、外出停车的时候不要乱停乱放,如果挡路碍事会招人划车漆。
2. Don't park when you go out. If you get in the way, you'll get scratched.
3、搅拌机刚买回来的时候要封一次釉,以后少抛光多打蜡。
3. When the blender is just bought back, it needs to seal the glaze once, and then polish less and wax more.
4、擦搅拌机不要干擦,上面的小沙励可能会磨损漆面,一定要水冲洗。
4. Don't dry wipe the blender. The small sand on it may wear the paint surface. Be sure to wash it with water.
上料搅拌车的动力由二类底盘全功率取力器输出通过传动轴把动力传给液压泵,液压泵产生液压能通过油管传到液压马达。
The power of the feeding mixer is output by the second class chassis full power take-off, and the power is transmitted to the hydraulic pump through the transmission shaft. The hydraulic pressure generated by the hydraulic pump can be transmitted to the hydraulic motor through the oil pipe.
液压马达把液压能转化为动能并通过减速机减速增扭传递到搅拌罐,通过调节(双作用变量)液压泵的伺服手柄角度达到调节搅拌罐正反转和转速的大小,以及完成砼装料、搅拌、搅动、出料等作业的目的。
The hydraulic motor converts the hydraulic energy into kinetic energy and transmits it to the mixing tank by decelerating and increasing the torque through the reducer. By adjusting the angle of the servo handle of the hydraulic pump (double acting variable), the positive and negative rotation and rotation speed of the mixing tank can be adjusted, and the concrete loading, mixing, stirring, discharging and other operations can be completed.

截屏,微信识别二维码