The tank body is made of 6mm alloy steel manganese steel, which has higher strength and more wear-resistant blades

流水线生产，搅拌筒整体拼焊工装设备保证产品质量，全自动环缝，纵缝，这些都是小厂无法比拟的。

Assembly line production, overall assembly of mixing drum, welder assembly equipment to ensure product quality, full-automatic circumferential seam and longitudinal seam, which are unmatched by small factories.

罐体封头采用自动旋边机旋边，内外对接满焊，并加厚达到8mm。

The tank head adopts automatic edging machine for edging. The internal and external butt joints are fully welded and thickened to 8mm.

液压系统采用德国力士乐液压泵，荣骄减速机;萨利液压泵，液压马达，意大利PMP摆线针轮减速机，原装进口，非贴牌产品。

The hydraulic system adopts German Rexroth hydraulic pump and rongjiao reducer; Sali hydraulic pump, hydraulic motor, Italian PMP cycloid pinwheel reducer, imported with original packaging, non OEM products.

内部叶片采用5mm细晶粒合金钢，采用UG和CAD计算机仿真技术设计成型，由技术人员结合规定，融合的风格重新设计，角度合理，搅拌更加均匀，卸料残存率更低，改进了传统搅拌过程中易出现的石子与水泥混合不均匀与叶片易磨损的现状;进料速度;3.8方/分，出料速度;3方/分钟，残留率<0.2%。

The internal blade is made of 5mm fine grain alloy steel, which is designed and formed by UG and CAD computer simulation technology. It is redesigned by technicians in combination with national regulations and integrated style, with reasonable angle, more uniform mixing and lower discharge residue rate, which improves the current situation of uneven mixing of stones and cement and easy wear of blades in the traditional mixing process; Feed speed; 3.8m3/min, discharge speed; 3m3 / min, residue rate & lt; 0.2%。

水泥搅拌车设计特点：

Design features of cement mixer truck:

低倾角设计：较同类搅拌车倾角低5%，系数高10%;进料口出料口设计合理，进出料速度快，操作简单

Low inclination design: the inclination is 5% lower and the safety factor is 10% higher than that of similar mixers; The design of the inlet and outlet is reasonable, the feeding and discharging speed is fast, and the operation is simple

搅拌筒：所采用的搅拌筒形式是一种应用较为普遍的结构形式，搅拌叶片采用三维双螺旋搅拌设计残余率低0.6%，优于国际标准2%，行业标准0.7%-1%。

Mixing drum: the adopted mixing drum is a widely used structural form. The mixing blade adopts three-dimensional double spiral mixing design, and the residual rate is as low as 0.6%, which is better than 2% of the international standard and 0.7% - 1% of the leading industry standard.

传动系统：拌筒的驱动方式为以发动机为动力源，由发动机后端的取力器取力，通过传动轴传递到液压泵，经马达减速机带动搅拌筒转动

Transmission system: the driving mode of the mixing drum is to take the engine as the power source, take the power from the power take-off at the rear end of the engine, transmit it to the hydraulic pump through the transmission shaft, and drive the mixing drum to rotate through the motor reducer

操纵系统：操纵系统通过汽车尾部的左右两个操纵杆来控制搅拌筒的正反转和转速，从而来完成进出料以及搅拌动作

Control system: the control system controls the forward and reverse rotation and rotation speed of the mixing drum through the left and right control levers at the rear of the car, so as to complete the feeding and discharging and mixing actions

供水系统：搅拌车的供水系统主要用来清洗搅拌罐及其外表，供水系统主要是压力水罐供水，水压可达压力0.6-0.8Mpa。

Water supply system: the water supply system of the mixer truck is mainly used to clean the mixing tank and its surface. The water supply system is mainly supplied by the pressure water tank, and the water pressure can reach 0.6-0.8mpa.

自动上料搅拌车专注为您提供新鲜的行业资讯,更多的问题及精彩内容请关注我们的网站：http://www.jfhntjbj.com，我们会有更多的精彩内容为您呈现.

Automatic feeding mixer focuses on providing you with fresh industry information. For more questions and wonderful contents, please pay attention to our website: http://www.jfhntjbj.com , we will have more wonderful content for you