自动上料搅拌车主要用于混凝土的制造和运输，实用性非常的强，它的使用范围也是越来越广泛，自然受到市场的欢迎。那么自动上料搅拌车作业时的性如何？

　　Automatic feeding mixer is mainly used in the manufacture and transportation of concrete, practical is very strong, its use is more and more widely, naturally welcomed by the market. So how professional is the operation of automatic feeding mixer?

　　在运输过程中，自动上料搅拌车的搅拌筒的转速须控制在每分钟左右的低速。搅拌筒中的叶片用于连续转动和搅拌混凝土，以防止静电引起的离析或硬化，确保运现场的混凝土质量。

　　In the process of transportation, the speed of the mixing barrel of the automatic feeding mixer must be controlled at a low speed of about per minute. Blades in the mixing cylinder are used for continuous rotation and mixing of concrete to prevent segregation or hardening caused by static electricity and to ensure the quality of concrete delivered to the site.

　　虽然运输距离增加了，但距离和时间不能太长，也不能超过混凝土的凝结时间。时间仍然受到混凝土质量和环境等因素的限制。严格来说，在不同的季节和时间，运输时间不同。

　　Although the transportation distance is increased, the distance and time should not be too long or exceed the setting time of concrete. Time is still limited by factors such as the quality of concrete and the environment. Strictly speaking, in different seasons and times, transport time is different.

　　另外，混合料不是成品混凝土，而是半成品。因此，搅拌筒在运输过程中的搅拌速度比预拌材料快得多。一般情况下，根据混凝土混合料的配制比例，速度控制在每分钟8到10转之间。为了节省时间，也可以在运输过程中将混合料搅拌到成品混凝土中，这需要添加相应的设备，如水箱。

　　In addition, the mixture is not finished concrete, but semi-finished. As a result, the drum is stirred much faster during transportation than the ready-mixed material. Under normal circumstances, the speed is controlled between 8 and 10 revolutions per minute, depending on the proportion of concrete mixture. To save time, the mixture can also be mixed into the finished concrete during transportation, requiring the addition of equipment such as water tanks.

　　这种运输过程中的搅拌可以增加运输距离，延长混凝土凝结时间。虽然为了增加运输距离和延长运输时间，在运输过程中将混合物混合到成品中可以节省固定投资，提高相对生产率，但对于长途运输来说，它是一个不错的选择！

　　The mixing in the transportation process can increase the transportation distance and prolong the concrete setting time. Although mixing the mixture into the finished product during transport can save fixed investment and improve relative productivity in order to increase transport distance and time, it is a good choice for long-distance transport!

　　然而，这种方法的缺点也很明显。很难获得的成品混凝土，这主要是由于设备的限制，对于要求严格的施工，尽量使用预拌混凝土的搅拌运输。

　　However, the disadvantages of this approach are also obvious. It is difficult to obtain high-quality finished concrete, which is mainly due to the limitation of equipment, for strict construction requirements, try to use the mixing transportation of ready-mixed concrete.

　　自动上料搅拌车作业时的性如何？从以上的内容中我们可以看出，该搅拌车在作业时的性还是非常不错的，值得选择！那么更多内容就来网站www.jfhntjbj.com看看吧！

　　How professional is the operation of automatic feeding mixer? From the above content, we can see that the mixing truck is very good in the professional operation, it is worth choosing! Then come to www.jfhntjbj.com for more content!