Since the loading mixer in the construction process, in order to improve their own interests, will continue to operate efficiently, assuming that the equipment due to defects and repair, it will increase a lot of costs. And usually in the operation of the mixer from the process of parts wear is more common, so in the use of we should be like this to avoid the occurrence of this situation?

1、坚持自上料搅拌车设备作业的额外载荷

1. Adhere to the additional load of self loading mixer

像这类的混凝土机械设备的载荷性质以及大小对设备零件的损耗都是有着重要影响的，一般机械零件的磨损都是会随着负荷的增加而增加的，当零件所承受的载荷高于设计的作业载荷时，其部件磨损将会不断加剧。

The load properties and size of such concrete machinery and equipment have an important impact on the loss of equipment parts. The wear of general mechanical parts will increase with the increase of load. When the load borne by parts is higher than the designed working load, the wear of parts will continue to intensify.

2、及时清洁，削减对机械杂质对设备的影响

2. Timely clean and reduce the impact of mechanical impurities on the equipment

机械杂质一般指的是灰尘、泥土等物质和工程机械在运用过程中自身发生的一些金属屑、油垢等。这些杂质一旦抵达机械的作业外表之间，其危害是很大的：不但使摩擦力增大，油耗升高。并且会损坏光滑油膜，擦伤协作外表。

Mechanical impurities generally refer to dust, soil and other substances and some metal chips and oil dirt that occur during the operation of construction machinery. Once these impurities reach the working surface of the machine, its harm is very big: not only increase the friction force, fuel consumption. And will damage the smooth oil film, scratch the cooperative surface.

3、预防自上料搅拌车零件腐蚀

3. Prevention of parts corrosion of self feeding mixer

腐蚀作用在零件上，有时不易被发现，简略被人忽视，危害性更大。雨水、空气中的化学物质等通过机械零部件的管道、缝隙等渗入机械，腐蚀零件。被腐蚀的零件继续作业也会使机械加快磨损，增加机械缺点。这就要求管理者和操作人员要根据当时当地的天气情况、工地现场情况，采纳合理的施工安排，尽可能减小化学腐蚀对机械零件的危害。

Corrosion on parts, sometimes not easy to be found, simply ignored, more harmful. Rain water, chemical substances in the air and so on penetrate into the machinery through the pipes and crevices of the mechanical parts and corrode the parts. The continued operation of corroded parts will also accelerate the wear of machinery and increase the mechanical defects. This requires managers and operators to adopt reasonable construction arrangements according to the local weather conditions and site conditions, so as to minimize the harm of chemical corrosion on mechanical parts.

4、坚持自上料搅拌车设备零件的合理温度

4. Adhere to the reasonable temperature of self feeding mixer parts

在作业中，各个零部件的温度都有各自的正常规模。温度过高过低会影响零件的强度，所以需要协作冷却液和光滑油控制部分零件的温度，使他们作业在合理温度规模。

In operation, the temperature of each part has its own normal scale. Too high or too low temperature will affect the strength of parts, so it is necessary to cooperate with coolant and smooth oil to control the temperature of some parts, so that they can work at a reasonable temperature scale.

许多机械设备在缺点开始的时候都是因为零件磨损引起的，自上料搅拌车在操作工作过程中天然也相同如此。因此，在运用过程中下降对设备零件的磨损，可以有用避免机械设备在运用过程中的缺点发生。

Many mechanical equipment at the beginning of the shortcomings are caused by parts wear, since the feeding mixer in the operation process of the same naturally. Therefore, reducing the wear of equipment parts in the process of application can be useful to avoid the shortcomings of mechanical equipment in the process of application.