欢迎来到中科聚峰机械有限公司!

24小时服务热线:

400-879-1999

点击拨打服务热线:400-879-1999
当前位置:首页>新闻中心>行业新闻自动上料搅拌车出现抱轴现象的原因

自动上料搅拌车出现抱轴现象的原因

来源:http://www.jfhntjbj.com/ 日期:2020-10-22 发布人:admin
概述:你知道自动上料搅拌车在工作时为什么会出现抱轴情况吗?因在整个搅拌期间,粉料、砂石、液体混合所形成的粘结物,黏附在搅拌轴、搅拌臂上,经过长时间的积累,机械内部表面就会形成一
你知道自动上料搅拌车在工作时为什么会出现抱轴情况吗?因在整个搅拌期间,粉料、砂石、液体混合所形成的粘结物,黏附在搅拌轴、搅拌臂上,经过长时间的积累,机械内部表面就会形成一层厚实且不易清理的粘结物。
Do you know why the axle of the automatic feeding mixer is holding up when it is working? During the whole mixing period, the binder formed by mixing powder, sand and liquid adheres to the mixing shaft and mixing arm. After a long time of accumulation, a thick and hard to clean adhesive will be formed on the internal surface of the machine.
影响混凝土质量,当机械在运行时出现抱轴后,就会打出不均匀的混凝土。增加机械负载,增加能耗。
Affect the quality of concrete, when the machine is in operation, the uneven concrete will be produced. Increase mechanical load and energy consumption.
影响耐磨件、轴端密封的使用寿命,加快耐磨件的磨损速度。发生抱轴后,搅拌臂也会磨损得非常严重,使用寿命也会明显缩短。
The service life of wear-resistant parts and shaft end seals is affected, and the wear rate of wear-resistant parts is accelerated. After axle holding, the mixing arm will be seriously worn and its service life will be significantly shortened.

自动上料搅拌车
对进料顺序、进料时间进行有效调整,骨料、粉料预混落入主机内(骨料须先下一部分),这样可让粉料在一定程度上附着在骨料上,减轻粉料落入主机内附着在搅拌轴、臂上的可能性降低,并且还可提高搅拌效率。
The feeding sequence and feeding time are effectively adjusted, and the premixed aggregate and powder fall into the host machine (the aggregate must be the next part first), which can make the powder adhere to the aggregate to a certain extent, reduce the possibility of powder falling into the host and adhere to the mixing shaft and arm, and improve the mixing efficiency.
主机盖水管中心线要求与搅拌轴中心线处于同一垂直面上,同时还应保证搅拌臂与搅拌轴夹角位置上方有直喷喷嘴。因搅拌臂、轴夹角位置是粘结物容易附着的地方,一般出现抱轴都是从搅拌臂根部开始,同时还要求加水时间贯穿始终。
The center line of the water pipe on the cover of the main engine should be in the same vertical plane as the center line of the mixing shaft. At the same time, it should be ensured that there is a direct injection nozzle above the angle between the mixing arm and the mixing shaft. Because the angle between the mixing arm and the shaft is the place where the adhesive is easy to adhere, the shaft holding usually starts from the root of the mixing arm, and at the same time, it is required to add water through the whole process.
随着工程项目的不断推进,与工程项目密切相关的搅拌设备使用次数也会随之加多,而它作为搅拌设备的“心脏”,提升机械设计、使用科学性
With the continuous progress of engineering projects, the use of mixing equipment closely related to engineering projects will also increase. As the "heart" of mixing equipment, it can improve the scientific design and use of machinery
具有关重要的作用。
It plays an important role.
今天的精彩内容就暂且给大家介绍到这里了,欢迎大家百度搜索:自上料搅拌车,这样可以找到我们,我们会定期发布更多的相关资讯,大家也可以直接收藏我们的官网:http://www.jfhntjbj.com!谢谢大家长久以来的支持!
Today's highlights will be introduced to you for the moment. Welcome to Baidu search: since the loading mixer, you can find us. We will release more relevant information regularly. You can also collect our official website directly: http://www.jfhntjbj.com ! Thank you for your long support!

截屏,微信识别二维码