In some construction process, the mixer is a relatively common machine and vehicle equipment. There are certain precautions when operating the equipment. Now, let's take a look at today's automatic loading mixer in the unloading process.

1.卸载前，将搅拌罐全速移动1-2分钟以完全搅拌混凝土。如有必要，加一点水使混凝土更均匀地混合，使其更容易卸料。

1. Before unloading, move the mixing tank at full speed for 1-2 minutes to fully mix the concrete. If necessary, add a little water to make the concrete mix more evenly and make it easier to unload.

自动上料搅拌车

2.卸货时，请将车停在尽可能平坦的地面上。在卸货前，请弄湿排水漏斗斜槽，以便于清洁。

2. When unloading, please park the car on the flat ground as far as possible. Before unloading, please wet the chute of drain funnel to facilitate cleaning.

3.建议您检查一下自己，以确保放电器在放电时不会随意操纵放电操作杆。为了保护减速器和支撑轮，建议每次在罐头处于向前和向后旋转的中间位置时都停止运行。

3. It is recommended that you check yourself to ensure that the discharge operating lever will not be operated at will during discharging. In order to protect the reducer and support wheels, it is recommended to stop each time the can is in the middle of forward and backward rotation.

4.清洗水箱时，请确保冲洗干净并在来水之前来回洒水两次。在一次行程中，将水箱中的所有水填充到水箱中，然后返回工作站加水以完全清洁水箱。

4. When cleaning the water tank, make sure that it is clean and spray water twice before the water comes. On the last trip, fill the tank with all the water from the tank and return to the workstation to add water to completely clean the tank.

希望在操作和使用自动上料搅拌车的过程中，我们每个人都需要了解这些注意事项，以确保设备的良好运行性能。避免由于对操作中的设备了解不足而导致操作错误，从而影响正常施工过程。

It is hoped that in the process of operating and using the automatic feeding mixer, each of us needs to understand these precautions to ensure the good operation performance of the equipment. Avoid the operation error caused by insufficient understanding of the equipment in operation, thus affecting the normal construction process.

自动上料搅拌车的卸料时的注意事项就是这些，欢迎来电咨询更多内容！

These are the matters needing attention when discharging the automatic feeding mixer. Please call us for more information!