In the construction site, the 4-party automatic feeding mixer is usually used, but the phenomenon of heat dissipation system failure may also occur. Next, let's analyze it.

液压油散热系统通常由四个部分组成，但是容易受到伤害的是保护整个回路的保险，因此，驾驶混凝土搅拌车的朋友遇到此类问题时请先检查，然后再对其他零件进行故障排除，检查保险是否正常。

The hydraulic oil cooling system is usually composed of four parts, but the most vulnerable part is the insurance to protect the whole circuit. Therefore, when a friend driving a concrete mixer encounters such problems, please check first, and then troubleshoot other parts to check whether the insurance is normal.

4方自动上料搅拌车的罐体由液压传动装置操作。液压油长时间以恒定速度在管道中流动，除了与管道壁发生摩擦外，它还增加了管道中各种阀门和油泵的阻力。升高油温。

The tank of 4-square automatic feeding mixer is operated by hydraulic transmission device. Hydraulic oil flows in the pipeline at a constant speed for a long time. In addition to friction with the pipe wall, it also increases the resistance of various valves and oil pumps in the pipeline. Increase the oil temperature.

搅拌车中的液压油正常工作是一件好事。保持恒定温度是很好的，但是如果温度超过温度范围，不仅整个操作系统将变得不稳定，而且密封件将被损坏，并且液压油会氧化并变质。

It is a good thing that the hydraulic oil in the mixer works normally. It is good to keep a constant temperature, but if the temperature exceeds the temperature range, not only will the whole operating system become unstable, but also the seals will be damaged, and the hydraulic oil will be oxidized and deteriorated.

4方自动上料搅拌车散热系统的故障分析，欢迎来电咨询！

4-party automatic feeding mixer cooling system fault analysis, welcome to inquire!