The structure of automatic feeding mixer is simple and easy to operate, but there are also many small problems in the operation, such as not discharging. Although it is a small problem, we should find the reason and solve it thoroughly.

自动上料搅拌车在正常情况下，搅拌时间到零后搅拌机会自动卸料，但是在生产过程中按下了操作台上的暂停按钮后到了搅拌时间，搅拌机没有卸料。这时候要先检查自动上料搅拌车的卸料门上的电磁阀，看电磁阀是否损坏，电磁阀损坏了卸料门就会打不开，搅拌机自然不会卸料，需要对电磁阀进行检修。

Under normal conditions, the mixer will discharge automatically when the mixing time reaches zero. However, when the pause button on the operation platform is pressed in the production process, the mixer will not discharge when the mixing time is reached. At this time, first check the solenoid valve on the discharge door of the automatic feeding mixer to see if the solenoid valve is damaged. If the solenoid valve is damaged, the discharge door will not open, and the mixer will not discharge naturally, so the solenoid valve needs to be overhauled.

若不是电磁阀的故障时就需要检查操作台上的暂停按钮是否按下，若没有按下就按下。若操作台上的按钮也没有问题就需要检查计算机的监控界面，看监控界面上的禁止出料控制是否被，若被立即取消。若以上都没有问题就是混凝土搅拌机坏掉了，就需要对搅拌机进行检查。

If it is not the fault of the solenoid valve, you need to check whether the pause button on the console is pressed. If not, press it. If there is no problem with the button on the console, you need to check the monitoring interface of the computer to see if the no discharge control on the monitoring interface is activated. If it is activated, it will be cancelled immediately. If there is no problem above, the concrete mixer is broken, so we need to check the mixer.

以上是自动上料搅拌车不卸料时常规的检查方法，如需了解更多，请点击下方二维码，关注自动上料搅拌车设备！

The above is the conventional inspection method when the automatic feeding mixer does not unload. For more information, please click the QR code below to pay attention to the experts of automatic feeding mixer!