自动搅拌车的出现和使用，可以为各类工程施工提供诸多便利，但是在使用过程中也会出现各种各样的问题，比如说自动搅拌车离合器的损坏，这是什么原因造成的呢

　　The emergence and use of automatic mixer can provide a lot of convenience for all kinds of engineering construction, but there will also be a variety of problems in the process of use, such as damage to the clutch of automatic mixer car, what is the cause of this

　　用户需要保证自动搅拌车的性能，重要的配件之一是变速器换档器。自动搅拌车离合器损坏的原因当动力换档变速箱离合器接合时，液压油的压力克服弹簧力压住摩擦片。随着液压油压力的升高，摩擦片与金属盘接触并逐渐被压缩，使离合器能够平稳地将飞轮的动力传递到变速器输入轴。

　　Users need to ensure the performance of the agitator, one of the important parts is the transmission shifter. When the power shift transmission clutch engages, the pressure of the hydraulic oil overcomes the spring force and presses down on the friction plate. As the hydraulic oil pressure increases, the friction plate comes into contact with the metal plate and gradually compresses, allowing the clutch to smoothly transfer flywheel power to the transmission input shaft.

　　自动搅拌车离合器活塞密封性能检测装载机无法行走或油温过高时，需要判断离合器活塞是否密封不严或油压不足引起，但有时很难确定是哪种原因是由常规测试方法引起的。组装后的传动总成的密封圈更难检查，尤其是在搅拌车没有动力的情况下。这时可以使用气压阀进行测试。

　　When the loader cannot walk or the oil temperature is too high, it is necessary to judge whether the clutch piston is not tightly sealed or caused by insufficient oil pressure, but sometimes it is difficult to determine which reason is caused by conventional test methods. The seals on the assembled transmission assembly are more difficult to inspect, especially if the mixer is not powered. This can be tested using a pneumatic valve.

　　自动搅拌车离合器损坏的原因已经找到了，是因为它的变速器换挡器出现了故障，这就需要用户提前做好预防工作了。那么想了解更多，就来这里www.jfhntjbj.com看看吧。

　　The cause of the clutch damage of the agitator has been found because of the failure of its transmission shifter, which requires the user to take precautions in advance. To learn more, check it out here at www.jfhntjbj.com/.