It is often heard that some drivers of all-in-one mixer trucks say that the problems will appear after the mixer truck has been used for a long time. In fact, it may be caused by the lack of effective maintenance methods. For the truck, many parts need to be replaced regularly to ensure the performance of the mixer truck more effectively. Let's introduce them in detail below.
1、 Regularly replace the lubricating grease of the mixer truck engine. In general, the manufacturer of self-priming mixer engine vehicles sold in the Chinese market will require the customer to change the grease when the vehicle travels 5000 kilometers to 15000 kilometers, while the manufacturer of the added mixer engine vehicles will require the replacement when the vehicle travels 5000 kilometers. If the mixer is not too driven or has been stopped, it is better to change the vehicle oil once a half year. Naturally, if the natural environment where the driver is located and the quality of the finished oil are not bad, the oil change cycle time and time can be appropriately increased.
2、 Replace the oil filter element regularly. The function of the oil filter element is to filter the residue, so it should be replaced with the automobile oil. If it is not replaced, the engine oil will not be filtered and the internal parts of the mixer engine will be damaged quickly due to the residues in the engine oil.
3、 Regularly replace the air filter element of the mixer truck. If the filter element is blocked seriously, the friction resistance at the air inlet will be increased and the output power of the mixer truck engine will be reduced. In addition, due to the increase of friction resistance, the amount of vehicle gasoline sucked in will also be increased, causing the mixing ratio to be too thick, which will further reduce the operation of the mixer engine, increase fuel consumption, and easily cause carbon deposition. The habit of checking the air filter element of the mixer truck should be cultivated.
4、 Frequently replace the brake oil of the mixer truck. The brake oil has a characteristic that it will digest and absorb the moisture in the air. The hydraulic transmission system of the brake pedal of the mixer truck must make the brake oil communicate with the air before everything can operate normally. In the long run, the brake oil will absorb moisture and turn into bubbles at high temperature. When bubbles appear in the brake oil circuit of the mixer truck, the efficiency of the brake pedal will be reduced. Therefore, the brake oil should be immediately checked and replaced on time according to the weather, software environment, seasonal change and working conditions.
General proposal: replace it every 2 years or when driving 50000 kilometers. When selecting and replacing brake oil, remember that brake oil of different types and famous brands cannot be mixed. Because the formula is different, mixing brake oil will cause the brake oil index value to decrease.
What parts of the mixer truck should be replaced frequently? We will answer this question from four aspects. For more information, please visit our website http://www.jfhntjbj.com Consult and understand.