搅拌一体车价格

24小时服务热线:

15053524111

点击拨打服务热线:15053524111
热门关键词: 自动搅拌车价格,自动上料搅拌车,搅拌一体车
当前位置:首页>自上料搅拌车技术问答>常见问题>介绍自动上料搅拌车的十大结构系统组成

介绍自动上料搅拌车的十大结构系统组成

来源:http://www.jfhntjbj.com/ 日期:2020-09-12 发布人:guanli 浏览:
TAG:自动搅拌车,自动上料搅拌车,搅拌一体车
概述:建筑施工中需要大量的混凝土,但是运输是很不方便的,现在有了自动上料搅拌车之后,就解决了这一麻烦。自动上料搅拌车有很多部分组成
建筑施工中需要大量的混凝土,但是运输是很不方便的,现在有了自动上料搅拌车之后,就解决了这一麻烦。自动上料搅拌车有很多部分组成,大体可分为十个系统:底盘系统、液压传动系统、搅拌罐体、出料系统、清洗系统、副车架、操纵系统、托轮系统、进料系统、电路系统十个部分组成。下面小编给大家详细介绍一下自动上料搅拌车的十大结构系统组成。
Construction needs a lot of concrete, but the transportation is very inconvenient, now with the automatic feeding mixer, this problem is solved. The automatic feeding mixer has many parts, which can be roughly divided into ten systems: chassis system, hydraulic transmission system, mixing tank body, discharging system, cleaning system, subframe, control system, supporting wheel system, feeding system and circuit system. The following small series for you to introduce the automatic feeding mixer of the top ten structure system composition.
自动上料搅拌车的十大结构系统组成
Composition of ten structural systems of automatic feeding mixer
一、自动上料搅拌车的十大结构系统组成
1、 Composition of ten structural systems of automatic feeding mixer
1、底盘系统:自动上料搅拌车的主要组成部分,整个自动上料搅拌车的运输就是有地盘来实现的。
1. Chassis system: the main component of the automatic feeding mixer. The transportation of the whole automatic loading mixer is realized by the site.
2、托轮系统:自动上料搅拌罐后部与副车架连接的部位,主要起支撑滚筒体的作用。
2. Supporting roller system: the part connecting the rear part of the automatic feeding mixing tank and the sub frame, mainly plays the role of supporting the drum body.
自动上料搅拌车的十大结构系统组成
Composition of ten structural systems of automatic feeding mixer
3、搅拌罐体:搅拌筒是整个自动上料搅拌车的关键部分,是存储混凝土的容器,对防止混凝土固化、离析起着决定性的作用。管体内部有叶片,主要起搅拌与导料的作用。
3. Mixing tank: the mixing drum is the key part of the whole automatic loading mixer, and it is the container for storing concrete, which plays a decisive role in preventing the solidification and segregation of concrete. There are blades inside the pipe body, which mainly play the role of mixing and guiding materials.
4、出料系统:主要由主卸料槽、副卸料槽、锁紧杆等组成,副卸料槽起延长主卸料槽的作用。
4. Discharge system: it is mainly composed of main discharge trough, auxiliary discharge groove and locking rod, etc. the auxiliary discharge groove plays the role of extending the main discharge tank.
自动上料搅拌车的十大结构系统组成
Composition of ten structural systems of automatic feeding mixer
5、电路系统:主要指整个的电路,包括整车的尾灯,侧标志灯、示廊灯、冷却风扇电机等。
5. Circuit system: mainly refers to the whole circuit, including tail lamp, side marker lamp, corridor lamp, cooling fan motor, etc.
6、副车架:自动上料搅拌车副车架是主要的承重部分,作业时的荷载几乎都是通过它来支撑在传递给底盘。自动上料搅拌车副车架还起到缓解路面的颠簸、减速形成的冲击荷载的作用。
6. Sub frame: the sub frame of the automatic feeding mixer is the main load-bearing part, and the load during operation is almost all supported by it and transferred to the chassis. The sub frame of the automatic loading mixer also plays a role in relieving the impact load caused by the bumps and deceleration of the road surface.
自动上料搅拌车的十大结构系统组成
Composition of ten structural systems of automatic feeding mixer
7、操作系统:自动上料搅拌车操作系统由控制器、联动轴、软轴及连杆机构组成,主要控制搅拌筒的转速及旋转方向。
7. Operating system: the operation system of automatic feeding mixer is composed of controller, linkage shaft, flexible shaft and connecting rod mechanism, which mainly controls the rotation speed and rotation direction of mixing drum.
8、液压传动系统:将经取力器取出的发动机动力,转化为液压能(排量和压力),再经马达输出为机械能(转速和扭矩),为搅拌筒转动提供动力。
8. Hydraulic transmission system: the engine power taken out by the power take-off is converted into hydraulic energy (displacement and pressure), and then output to mechanical energy (speed and torque) by motor to provide power for the rotation of mixing drum.
自动上料搅拌车的十大结构系统组成
Composition of ten structural systems of automatic feeding mixer
9、进料系统:主要由进料斗与支架组成,进料斗由于受冲击磨损较大,材料要求耐磨性好,支架主要起减轻冲击力的作用。
9. Feeding system: it is mainly composed of feeding hopper and support. Due to the impact wear of feeding hopper is large, the material requirement is good wear resistance, and the support mainly plays the role of reducing impact force.
10、清洗系统:清洗系统主要由压力水箱、水枪、水管、阀等组成。采用气压供水,主要作用是在装完料后冲洗料斗及出料完毕后冲洗搅拌筒、卸料槽,防止混凝土粘结。
10. Cleaning system: the cleaning system is mainly composed of pressure water tank, water gun, water pipe, valve, etc. The pneumatic water supply is mainly used to flush the hopper after loading and the mixing drum and discharge tank after discharging to prevent concrete from sticking.

截屏,微信识别二维码

微信号:

点击微信号复制,添加好友

 打开微信