搅拌一体车价格

24小时服务热线:

15053524111

点击拨打服务热线:15053524111
热门关键词: 自动搅拌车价格,自动上料搅拌车,搅拌一体车
当前位置:首页>自上料搅拌车技术问答>常见问题>延长搅拌车车轮的使用年限的方法有哪些?

延长搅拌车车轮的使用年限的方法有哪些?

来源:http://www.jfhntjbj.com/ 日期:2020-12-18 发布人:guanli 浏览:
TAG:自动搅拌车,自动上料搅拌车,搅拌一体车
概述:搅拌车经常行驶在马路上,随着车子的行驶,车上的混凝土也会跟着被搅拌,等到了目的地之后,车上的混凝土基本上搅拌完成,不干结,可以立刻使用。由于车轮在行驶过程中经常接触地面所
搅拌车经常行驶在马路上,随着车子的行驶,车上的混凝土也会跟着被搅拌,等到了目的地之后,车上的混凝土基本上搅拌完成,不干结,可以立刻使用。由于车轮在行驶过程中经常接触地面所以也难免会出现磨损情况。如何让搅拌车车轮耐用?
The mixer truck often drives on the road. With the car running, the concrete on the truck will be mixed along with it. After arriving at the destination, the concrete on the truck is basically mixed and does not dry, so it can be used immediately. As the wheels often contact the ground in the process of driving, it is inevitable that there will be wear. How to make the mixer wheel durable?、

1、避免原地打方向
1. Avoid turning in place
由于车感不佳,很多新手都喜欢原地打方向,这个坏习惯基本上是从驾校里面带出来的。原地打方向会令轮胎的磨损集中在同一个接触面上,造成轮胎局部严重磨损,缩短使用寿命。因此,司机应避免原地打方向,而应该在轮胎滚动时打方向,这样的话,地面给搅拌车轮胎带来的才是全方位且均匀的正常磨损。
Due to the poor feeling of the car, many novices like to play in situ. This bad habit is basically brought out of the driving school. Turning the direction in place will make the wear of the tire concentrate on the same contact surface, causing serious local wear of the tire and shortening its service life. Therefore, the driver should avoid turning the direction in situ, and should turn the direction when the tire is rolling. In this way, the ground will bring all-round and uniform normal wear and tear to the mixer tire.
搅拌一体车
Mixer truck
2、避免撞击路肩和陷入坑洞
2. Avoid bumping into shoulders and potholes
有些司机的停车方式比较霸气,他们喜欢让搅拌车骑上路肩停放。在搅拌车骑上路肩的过程中,轮胎会受到挤压,容易导致搅拌车轮胎侧面的帘子线断裂,造成轮胎鼓包。
Some drivers tend to park their cars on the shoulder of the road. In the process of mixing truck riding on the shoulder, the tire will be squeezed, which is easy to cause tire cord breakage on the side of mixer tire, resulting in tire bulge.
路面的坑洞同样要避开。当搅拌车轮胎碾过坑洞时,搅拌车轮胎同样会受到挤压。坑洞越大、车速越高,轮胎受到的挤压力度也越大,这样也会导致轮胎出现鼓包。
The potholes on the road should also be avoided. When the mixer tire runs through the hole, the mixer tire will also be squeezed. The larger the hole and the higher the speed, the greater the pressure on the tire, which will also lead to the tire bulge.
3、避免蹭胎壁
3. Avoid rubbing against the tire wall
很多时候,蹭胎壁是在搅拌车靠边时无意中造成的,可能是司机车感不佳,也可能是司机开小差。搅拌车轮胎侧面属于轮胎的薄弱部位,磨损严重的话也会造成轮胎鼓包,带来爆胎的隐患。因此,司机在靠边停车的时候,应该多留心搅拌车与路肩的距离,避免蹭胎壁。
Most of the time, rubbing the tire wall is unintentionally caused when the mixer is drawing near. It may be the driver's poor feeling of the car, or the driver's desertion. The side of the mixer tire is the weak part of the tire. If the tire is seriously worn, it will cause the tire bulge and bring the hidden danger of tire burst. Therefore, the driver should pay more attention to the distance between the mixer and the road shoulder to avoid rubbing the tire wall.
4、保持合适的胎压
4. Maintain proper tire pressure
合适的胎压能保证混凝土搅拌车轮胎的接地面积均匀,减少不必要的磨损。因此,司机应该养成定期检测胎压的习惯,随时了解轮胎的胎压状况。检测胎压可以到专业的维修店,也可以购买胎压计自己检测,胎压标准可参照搅拌车的胎压标签。
Proper tire pressure can ensure the even ground area of concrete mixer tire and reduce unnecessary wear. Therefore, the driver should develop the habit of regularly testing the tire pressure, and know the tire pressure status at any time. You can go to a professional repair shop to test the tire pressure. You can also buy a tire pressure gauge to test it yourself. The tire pressure standard can refer to the tire pressure label of the mixer.
5、夏天不要降低胎压
5. Don't reduce tire pressure in summer
不少司机错误地认为,夏天气温高,降低胎压能避免爆胎。这样操作,搅拌车轮胎与地面的接触面会加大,摩擦力增加,加快轮胎磨损,而且会导致搅拌车胎温上升更快,更容易爆胎。所以,夏天依然要保持正常的胎压。
Many drivers mistakenly believe that the temperature is high in summer and reducing the tire pressure can avoid tire burst. In this way, the contact surface between the mixer tire and the ground will increase, the friction force will increase, the tire wear will be accelerated, and the temperature of the mixer tire will rise faster, and the tire will burst more easily. Therefore, it is necessary to maintain normal tire pressure in summer.
注意大家一定要加强对车轮的保养,另外混凝土搅拌车在行驶过程中尽可能避免走一些坑坑洼洼的路,这样可以有效保护了车轮,对于延长车轮的使用寿命有帮助。
Attention must be paid to the maintenance of the wheels. In addition, the concrete mixer truck should avoid taking some potholes as far as possible during the driving process, which can effectively protect the wheels and help to prolong the service life of the wheels.

截屏,微信识别二维码

微信号:

点击微信号复制,添加好友

 打开微信