When changing the engine oil of self feeding mixer, pay attention not to add but not to replace.
I think everyone knows a widely used mixer, but no one knows some problems of changing oil. Next, I will explain the content that the self feeding mixer can avoid oil accumulation and keep the same oil.
When using diesel engine, oil is very important, mainly used for lubrication, cooling and cleaning. Therefore, many self loading mixer drivers pay attention to check the amount of lubricating oil and add it according to the standard, but ignore the inspection of the quality of lubricating oil and remove the deteriorated oil in time. This always promotes the wear of each part of the engine in the running environment.
Usually, under normal conditions, the loss of oil is not great, but it will cause pollution and lose the role of protecting diesel engine. During the operation of diesel engine, many pollutants (soot, coke, scale produced by incomplete combustion of fuel) enter into the engine oil. For new or overhauled machines, impurities will increase after running test. If only used without replacement, accidents such as brick burning and fixed shaft may occur.
In addition, due to lack of maintenance experience or failure, some drivers can not completely clean the oil circuit during the oil change process, thus leaving mechanical impurities in the oil pan and oil passage.
This is the important introduction about oil change from the feeding mixer. I hope it can help you.