自动搅拌车运输建筑材料时，需要进行日常的维护保养，尽量保护好搅拌车的各个部件，这样在使用过程中就不会出现问题。接下来小编就告诉大家如何保养车灯。

When the automatic mixer transports building materials, it needs to carry out daily maintenance, and try to protect all parts of the mixer, so that there will be no problems in the process of use. Next, Xiaobian will tell you how to maintain the lights.

1、要合理认识车灯的不同功能，对搅拌车的灯进行保养。车灯主要包括转向灯、牌照灯、示宽灯、停车灯、倒车灯和刹车灯。灯。

1. It is necessary to reasonably understand the different functions of the lights and carry out comprehensive maintenance on the lights of the mixer truck. Lamps mainly include turn signal lamps, license plate lamps, side marker lamps, parking lamps, reversing lamps and brake lamps. Lights.

2、对灯的特殊位置进行特殊保护，自动搅拌车应使用雾灯作为标准设备或流行的选装件。损坏，因此出现裂缝时需要及时更换。

2. The special position of the lamp shall be specially protected, and the automatic mixer shall use the fog lamp as a standard equipment or a popular option. It is damaged, so it needs to be replaced in time when cracks appear.

3、灯罩采用特殊材料制成，密封性能好。但是，如果经常摩擦，很容易使透光率变差，导致光线亮度变暗等不良情况。因此，定期擦洗灯罩对灯具的性能有帮助。

3. The lampshade is made of special materials with good sealing performance. However, if it is often rubbed, it is easy to make the light transmittance worse, resulting in poor conditions such as dim light brightness. Therefore, regular scrubbing of the lampshade is helpful to the performance of the lamp.

此外搅拌车年检时，会检查光束的位置是否正确。正确的光束位置将使视野更清晰，驾驶更。

In addition, during the annual inspection of the mixer truck, it will check whether the position of the beam is correct. The correct beam position will make the vision clearer and the driving safer.

选择黑暗的环境，如夜间地下停车，将搅拌车车头靠墙停放，并尽量将车头与墙壁对齐，相距约5米或6米；

Choose a dark environment, such as underground parking at night, park the front of the mixer against the wall, and try to align the front with the wall, with a distance of about 5 or 6 meters;

打开大灯，用厚厚的不透明布盖住一个大灯，单独调整每个大灯。为了保证搅拌机

Turn on the headlights, cover one headlamp with a thick opaque cloth, and adjust each headlamp separately. To ensure that the mixer

用记号笔或粉笔在墙壁的灯光范围标记搅拌车的灯光，并在墙壁上对应车标的位置做一个标记。

Mark the light of the mixer truck in the center of the light range of the wall with a marker or chalk, and make a mark on the wall at the position corresponding to the vehicle logo.

测量搅拌车两侧灯标与中心位置的距离，两者距离应相等。如出现外偏或内偏现象，应阅读搅拌车使用说明书，用螺丝刀微调，使两个灯的位置对称；

Measure the distance between the lights on both sides of the mixer and the center, and the distance between the two should be equal. In case of external deviation or internal deviation, you should read the operation manual of the mixer truck and fine tune with a screwdriver to make the positions of the two lights symmetrical;

调整梁的高度。右侧搅拌车灯应完全水平直射，左侧搅拌车灯应向上抬高10cm左右，但不要调得太高，以免灯光直射映在迎面而来的司机的眼睛上。右侧灯的照明范围可以向右移动，以提高右侧的能见度。

Adjust the height of the beam. The mixing lamp on the right side should be completely horizontal and direct, and the mixing lamp on the left side should be raised by about 10cm, but do not adjust it too high, so as to avoid direct reflection of the light on the eyes of the oncoming driver. The lighting range of the right side lamp can be moved to the right to improve the visibility of the right side.

以上就是自动搅拌车灯的保养方法。虽然这是一个小问题，但却是我们经常忽略的问题。我希望你会注意它，更多内容就来关注我们网站http://www.jfhntjbj.com获取到吧。

The above is the maintenance method of automatic mixing lamp. Although this is a small problem, it is a problem we often ignore. I hope you will pay attention to it and pay more attention to our website http://www.jfhntjbj.com Get it.