What are the requirements of the general users wh
What are the requirements of the general users who buy automatic mixer trucks? Let me introduce it to you today.
1. It is important to know that the mixing of concrete by the mixer truck is uniform. At present, the concrete mixed by the mixer truck in many mixing stations will be directly transported to the high-rise building floor through the pump truck. The pump truck has certain requirements for the uniformity of concrete. If the concrete is not evenly mixed, it is easy to block the pump truck, and the pump pipe may be broken seriously. However, the price of a pump truck is very expensive, Therefore, the mixing station pays more attention to the uniformity of concrete.
2. The hydraulic system shall be reliable. The power of the mixing tank of the mixer truck is realized by the hydraulic system. If the quality of the parts in the hydraulic system is unqualified, the service life of the mixer truck will be directly affected. At present, many hydraulic parts of the mixer truck are imported brands, and only some small-sized hydraulic parts of the mixer truck are domestic.
3. Other aspects, such as:
The bearing capacity of the mixer truck is mainly on the rear axle. If the road on which the mixer truck travels is relatively flat, the single-stage deceleration bridge is generally selected; If the road conditions of the mixer truck you purchased are poor and you often need to go uphill and downhill, it is better to choose the roadside deceleration bridge. The wheel side deceleration strength is smaller than the single-stage deceleration bridge, and the gap between the wheel and the ground is large. The vehicle has good trafficability and strong climbing ability.
There are two types of steel tire and nylon tire for mixer truck. Relatively speaking, the service life of steel tire is much longer than that of nylon tire, and the driving resistance of steel tire is relatively small. Of course, the price is high, but it is worth it. Now many people choose steel tire.
The tank body of the mixer truck is generally made of steel plate, but its thickness is different. The tank body of the mixer truck with single bridge is generally 5-6mm thick, and the tank body of the mixer truck with double bridge and above is generally about 8mm thick.
In addition, select the appropriate loading capacity according to the construction site where you work. The transportation efficiency of the mixer truck is directly related to the loading capacity, but at the same time, the corresponding cost will be high. You should still select the appropriate loading capacity according to your own conditions. For more information, please visit our website http://www.jfhntjbj.com Consult!