Most of the mixing operation of the automatic feeding mixer is mechanical mixing. The mixing equipment of medium and low pressure vertical steel vessels is mainly used to understand the problems of the mixer

紧急驱动完毕后,将驱动软管卸下,并恢复两车原状。将自上料混凝土搅拌车熄火,将其液压马达的高压油管卸下,并与故障车上的对应接头用紧急驱动软管相在托轮和滚道之间放入木楔,以控制搅拌筒的旋转。

After the emergency drive, remove the drive hose and restore the original state of the two vehicles. Turn off the self loading concrete mixer, remove the high-pressure oil pipe of its hydraulic motor, and put a wooden wedge between the supporting wheel and the raceway to control the rotation of the mixing drum.

自动上料搅拌车

Automatic feeding mixer

一定要注意;将发动机熄火，拆松液压马达的一根高压油管,搅拌筒可自由旋转，控制搅拌筒的旋转,使维修孔转到下部,然后打开维修孔，清理出筒内混凝土,此时一定要注意,混凝土排出完毕后，恢复搅拌车原状。发动搅拌车,将其操纵手柄拨出料位置,故障车内的混凝土即被排出。 准备好紧急驱动软管,将搅拌车熄火,卸下液压马达上的高压油管接头。

Be sure to pay attention to safety; turn off the engine and loosen a high-pressure oil pipe of the hydraulic motor. The mixing cylinder can rotate freely, control the rotation of the mixing cylinder, make the maintenance hole turn to the lower part, and then open the maintenance hole to clean out the concrete in the cylinder. At this time, pay attention to safety. After the concrete is discharged, restore the mixer truck to its original state. Start the mixer, turn its control handle to the discharging position, and the concrete in the fault truck will be discharged. Prepare the emergency drive hose, turn off the mixer, and remove the high-pressure oil pipe connector on the hydraulic motor.

本公司主要是从事工程建筑机械行业，主要就是做搅拌机的，在质量上尽可放心，集研发销售为一体，欢迎各位来厂咨询。

The company is mainly engaged in the construction machinery industry, mainly to do blenders, in the quality can be assured, set R & D sales as one, welcome to the factory consultation.