概述：大部分人可能对于自动上料搅拌车的相关知识不太了解，自动上料搅拌车主要结构由是行走底盘、发动机、液力变矩器、前后双驱桥、上料装置、进料斗、卸料斗、加长卸料斗、机架、搅拌筒、
大部分人可能对于自动上料搅拌车的相关知识不太了解，自动上料搅拌车主要结构由是行走底盘、发动机、液力变矩器、前后双驱桥、上料装置、进料斗、卸料斗、加长卸料斗、机架、搅拌筒、搅拌专用减速机、液压系统、电控系统、自动上水系统等组成。在这里小编就详细的给大家介绍一下自动上料搅拌车的一些特征，具体的特征如下：
Most people may not know much about the relevant knowledge of the automatic feeding mixer. The main structure of the automatic charging mixer is composed of walking chassis, engine, hydraulic torque converter, front and rear double drive axle, feeding device, feeding hopper, unloading hopper, lengthening discharge hopper, rack, mixing drum, mixing reducer, hydraulic system, electric control system, automatic water feeding system, etc. Here, we will introduce some features of the automatic feeding mixer in detail. The specific features are as follows:
1.搅拌车搅拌筒的旋转由液压马达通过专用行星减速机带动，行星减速机的输出轴可以实现一定角度的摆动，以满足恶劣路况下搅拌筒的跳动。
1. The rotation of mixer drum is driven by hydraulic motor through special planetary reducer. The output shaft of planetary reducer can swing at a certain angle to meet the beating of mixing drum under bad road conditions.
2.液压系统采用恒功率变量柱塞泵，减少发动机的功率损耗。
2. The hydraulic system adopts constant power variable piston pump to reduce the power loss of the engine.
3.进水系统可根据计量设定实现自动进水。
3. The water inlet system can automatically feed water according to the metering setting.
4.干料上料，按照设计好的配比由铲臂、动臂缸、定量的料斗自动上料。
4. Dry material feeding: according to the designed proportion, the shovel arm, boom cylinder and quantitative hopper are automatically fed.
5.自动上料搅拌车搅拌筒内壁上设置双螺旋形叶片，正向旋转为进料、混凝土搅拌；反向旋转，在螺旋叶片的推动下、混凝土由出料口出料。
5. Double spiral blades are set on the inner wall of the mixing drum of the automatic feeding mixer, and the forward rotation is the feeding and concrete mixing; the reverse rotation is that the concrete is discharged from the discharge outlet under the push of the spiral blade.
6.行走系统由发动机通过液力变矩器、前后传动轴到前后桥。本发明采用前后双桥驱动形式。采用液力变矩器减少对发动机的冲击、延长了发动机的寿命。
6. The walking system is from the engine to the front and rear axles through the hydraulic torque converter, front and rear transmission shafts. The invention adopts the front and rear double axle driving form. The hydraulic torque converter is used to reduce the impact on the engine and prolong the service life of the engine.
通过以上六点特征的介绍，希望能够对大家有所帮助，如果还有不明白的地方欢迎与我们取得联系！
Through the introduction of the above six features, I hope to be helpful to you. If there is still something you don't understand, please contact us!
相关便签：
自动上料搅拌车
点击拨打服务热线：400-879-1999
